Item type |
Symposium(1) |
公開日 |
2019-11-28 |
タイトル |
|
|
タイトル |
MRによって実空間に実務環境を再現するネットワーク設計補助システムの検討 |
タイトル |
|
|
言語 |
en |
|
タイトル |
Study of Network Design Support System that Reproduces the Working Environment in Real Space by MR |
言語 |
|
|
言語 |
jpn |
キーワード |
|
|
主題Scheme |
Other |
|
主題 |
ネットワーク設計 |
資源タイプ |
|
|
資源タイプ識別子 |
http://purl.org/coar/resource_type/c_5794 |
|
資源タイプ |
conference paper |
著者所属 |
|
|
|
近畿大学大学院総合理工学研究科 |
著者所属 |
|
|
|
近畿大学理工学部情報学科 |
著者所属(英) |
|
|
|
en |
|
|
Graduate School of Science and Engineering Research, Kindai University |
著者所属(英) |
|
|
|
en |
|
|
Department of Informatics, Faculty of Science and Engineering, Kindai University |
著者名 |
後安, 謙吾
井口, 信和
|
著者名(英) |
Kengo, Goan
Nobukazu, Iguchi
|
論文抄録 |
|
|
内容記述タイプ |
Other |
|
内容記述 |
ネットワークの構成を変更する際には,事前に設計を行う.設計では,現状のネットワークの構成などの調査を実施する.ネットワークの構成を把握するには,物理構成図や論理構成図を用いる.しかし,構成図の情報ではネットワーク機器間の距離などが不明瞭なため,設計したネットワークが現場で構築できない恐れがある.そのため,現場に赴くことが考えられるが,設計ごとに現場に赴く必要があり,手間を要する.設計後には変更により障害が発生しないかの検証を実施する.検証では,稼働しているネットワークと同様の環境を用意し,実施することが有効であるが,経済的な問題などから容易ではない.これらの問題を解決するため,我々は MR によって実空間に実務環境を再現するネットワーク設計補助システムを開発している.本システムにより,設計段階で実務環境の設定情報や,ネットワーク機器間の距離などの物理情報を考慮したネットワークの設計が可能になる.また,設計したネットワークの検証が,実機を用いることなく,実務環境に近い環境で実施可能となる. |
論文抄録(英) |
|
|
内容記述タイプ |
Other |
|
内容記述 |
Before changing the network configuration, the network engineer performs design work. In the design, network engineers investigate the current network configuration. To understand the network configuration, use a physical configuration diagram or a logical configuration diagram. However, if only the information of the configuration diagram is used, the distance between the network devices is unclear, so the designed network may not be constructed on site. Therefore, it is possible to go to the field, but it is necessary to go to the field every time the network engineer performs the design, and it takes time and effort. After the design, we will verify if there is a failure due to the change. In the verification, it is effective to prepare and conduct the same environment as the operating network, but it is not easy because of economic problems. In order to solve these problems, we are developing a network design support system that reproduces the working environment in real space by MR. This system makes it possible to design a network that takes into account physical information such as the setting information of the working environment and the distance between network devices at the design stage. In addition, verification of the designed network can be performed in an environment close to a practical environment without using a real machine. |
書誌情報 |
インターネットと運用技術シンポジウム論文集
巻 2019,
p. 39-46,
発行日 2019-11-28
|
出版者 |
|
|
言語 |
ja |
|
出版者 |
情報処理学会 |