WEKO3
-
RootNode
アイテム
幾何学的方法による三次元Grid Generation
https://jaxa.repo.nii.ac.jp/records/43300
https://jaxa.repo.nii.ac.jp/records/4330061932628-bc9c-4f56-9308-270743632a5e
| 名前 / ファイル | ライセンス | アクション |
|---|---|---|
nalsp0009009.pdf (514.2 kB)
|
|
| Item type | テクニカルレポート / Technical Report(1) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 公開日 | 2015-03-26 | |||||||||
| タイトル | ||||||||||
| タイトル | 幾何学的方法による三次元Grid Generation | |||||||||
| 言語 | ||||||||||
| 言語 | jpn | |||||||||
| 資源タイプ | ||||||||||
| 資源タイプ識別子 | http://purl.org/coar/resource_type/c_18gh | |||||||||
| 資源タイプ | technical report | |||||||||
| その他のタイトル（英） | ||||||||||
| その他のタイトル | 3-D Grid Generation Using the Geometrical Method | |||||||||
| 著者 |
児玉, 良明
× 児玉, 良明
× Kodama, Yoshiaki
|
|||||||||
| 著者所属 | ||||||||||
| 船舶技術研究所 | ||||||||||
| 著者所属（英） | ||||||||||
| en | ||||||||||
| Ship Research Institute | ||||||||||
| 出版者 | ||||||||||
| 出版者 | 航空宇宙技術研究所 | |||||||||
| 出版者（英） | ||||||||||
| 出版者 | National Aerospace Laboratory(NAL) | |||||||||
| 書誌情報 |
航空宇宙技術研究所特別資料 en : Special Publication of National Aerospace Laboratory SP-9 巻 9, p. 55-60, 発行日 1988-12 |
|||||||||
| 抄録（英） | ||||||||||
| 内容記述タイプ | Other | |||||||||
| 内容記述 | 3-D grid was generated using a geometrical method, in which an initial grid was modified iteratively according to several geometrical requirements. The requirements were orthogonality, smoothing, clustering, and minimum spacing. They can be used either separately or in combination. In case they are used in combination, the modified grid is obtained as a compromise among conflicting requirements. An important tool which supports the above four algorithms in grid generation is re-clustering. Based on an initial grid distribution, it is used for re-distributing points according to a new clustering requirement, and at the same time, for changing the number of points. The requirements can also be used for tuning an existing grid. It can be used either globally or locally. An example of tuning of 2-D grid around a turbine blade was shown. The third usage of the method is to quantify the grid quality. An example of 3-D grid was shown, where the orthogonality requirement was used to measure deviation from orthogonality, and the deviation was plotted as 3-D contours. Further improvement is needed in the way the requirements are combined to update the grid | |||||||||
| ISSN | ||||||||||
| 収録物識別子タイプ | ISSN | |||||||||
| 収録物識別子 | 0289-260X | |||||||||
| 書誌レコードID | ||||||||||
| 収録物識別子タイプ | NCID | |||||||||
| 収録物識別子 | AN10097345 | |||||||||
| 資料番号 | ||||||||||
| 内容記述タイプ | Other | |||||||||
| 内容記述 | 資料番号: NALSP0009009 | |||||||||
| レポート番号 | ||||||||||
| 内容記述タイプ | Other | |||||||||
| 内容記述 | レポート番号: NAL SP-9 | |||||||||
Share
Cite as
児玉, 良明, Kodama, Yoshiaki, 1988, 幾何学的方法による三次元Grid Generation: 航空宇宙技術研究所, 55–60 p.
Loading...
